
EN ENGLISH
Headset Controls
Action | Steps |
Turn on the | Press and hold the call control button until the indicator |
headset | glows blue. |
| Note: When your headset is in standby mode, the indicator is off. |
| To confirm that your headset is on, press any button or slide the |
| boom out. You should see a blue light flash or hear a tone. |
Turn off the | Press and hold the call control button until the indicator glows |
headset | red. When the power is off, the indicator stays off. |
Answer a call | Briefly press the call control button, or slide the boom to the |
| open position. |
End a call | Briefly press the call control button, or slide the boom to the |
| closed position. |
Make a call | The call automatically transfers to your headset after you enter |
the number on your phone and press send.
Toggle mute | Press the mute button. |
on/off |
|
Turn off the | Press and hold mute for 2 seconds while the headset is on. |
online indicator | Headset will flash blue 4 times. Repeat action to activate |
| online indicators. Headset will flash blue 2 times. |
Adjust volume | During an active call, press the volume button: |
Volume up
Volume down
WARNING: Do not use headphones / headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more information on headsets and hearing.
12 | Plantronics Voyager 855 |