Take A Good Look, Call Button, Music Button

TAKE A GOOD LOOK

• Take a call or end it (1 tap)

•Redial (2 taps)

• Initiate phone’s voice-dialing (2-second
press until tone is heard)
• Reconnect lost Bluetooth connection	+
(1 tap if the headphones don’t automatically	-
(1 tap if the headphones don’t automatically
reconnect)

•Cancel missed call LED (1 tap)

•Reject a call (2-second press)

•Transfer call to/from phone

(during call, 2-second press)

•Enable/disable on-a-call LED (while powered on, 2-second press Call and Volume up buttons)

•Use with the AC charger:

1 hour before first use

3 hours (100% charge)

•Do not use headphones while charging

•Volume up/down (1 tap per level change)

•Track forward/back (2-second press per track change)

•Enable/disable OpenMic™ (3-second press Call and Volume down buttons)

LED

• Charging (solid red)

•Fully charged (brief solid blue flash)

• Low battery (2 red flashes every

15 minutes)

•On a call (blue flash every 2 seconds

while on a call)

•Missed call (3 purple flashes repeating for 5 minutes or until cancelled)

•Pairing mode (repeating red/blue flashes)

•Play/pause (1 tap)

•Bass boost (2-second press)

•Mute music or call (1 tap)

•Use OpenMic™ to pause music and activate mic (1 tap)

•On/off (2-second press to turn on, 4-second press to turn off)

•Activate pairing mode after initial set up (press until red/blue LED flashes)

•Check battery level (1 tap)

Be safe! Please read the safety guide for important safety, charging, battery and regulatory information before using your new headphones.