Plantronics CS530 Customize Your Headset

7

Customize Your Headset

Customize the headset by changing the eartip, wearing it on the right or left

and optimizing the position of the microphone.

Change the Eartip

1 The headset comes with a pre-installed eartip. To install a different eartip see the following:

Remove the pre-installed eartip by pushing in and turning the eartip CLOCKwise, then pull ﬁrmly.

2 Choose the size and style of eartip that ﬁts most comfortably. Align eartip tabs with notches in

headset. Push in ﬁrmly and twist COUNTER clockwise.

NOTE When installing a gel tip ensure the raised part of the eartip is pointed toward the curved

section of the headset as shown.

Position Your Headset

When you wear the headset, the microphone should rest as close to your cheek as possible

without touching. The microphone can be adjusted inward by pivoting the earpiece to optimize

the position of the headset.

1 Slide the headset over and behind your ear, then press gently toward your ear.

Contents

Main ContentsContents Welcome Page Base and Headset Basics Headset overview Base overview Page Customize Your Headset Change the Eartip Position Your Headset Left Ear Wearing Page Connect and Congure Your Desk Phone Desk Phone (standard) Check Conguration and Make a Test Call Desk Phone plus HL10 Lifter (sold separately) USE If You Do Not Hear a Dial Tone Additional Parts (if required) Extender Arm Ringer Microphone Page Page Your Headset Headse t Controls IMPORT ANT Talk Time Page Your Base Base Phone Button and Switches 1 Subscription Button Automatic Secure Subscription Manual Over-the-Air Subscription 2 Wideband/Narrowband Audio Switch NOTE: 3 Auto Answer Switch NOTE Daily Use Place an Outgoing Call Answer an Incoming Call Conference Up to Three Additional Headsets Join a Conference Call Troubleshooting HEADSET Desk Phone NEED MORE HELP?