Plantronics Headset System manual

1

2

NOTE: Depending on preference, you can replace the pre-installed leatherette ear cushions with the alternative foam cushions included.

1.Adjust headband to fit.

2.Rotate voice tube or noise-canceling microphone until it is pointed towards your chin.

12

Enable

OR

Disable

1.To pair another headset to the same base, you must first enable the multi-shift pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on back of base until the power indicator light flashes.

2.Place a charged headset in charging cradle and red indicator light on base will flash for 2 seconds if the multi-shift pairing feature is enabled. Within 10 seconds of doing so, press either the "+" or "-" listening volume button for 3 seconds until

the headset talk indicator lights to indicate pairing mode, and goes out after successful pairing. Repeat steps 1 and 2 if headset and base do not link when call control button is pressed.

NOTE: Only the last paired headset will work with the base. You must NOT be in talk mode (i.e. on a call) to enable or disable this feature.

To disable the multi-shift pairing feature, long press (5 sec.) the speaking volume minor adjust down button until the power indicator light flashes.

1

2

To make a call:

1.Take your handset off-hook. Dial tone should sound through handset (if not, check compatibility—see page 13).

2.Press the call control button on the headset. The talk indicator lights on both the base and the headset should go on, indicating a successful link. Dial tone should sound through headset. Dial using the telephone keypad.

To answer a call:

1.Take the handset off-hook.

2.Press the call control button on the headset to answer a call.

To end a call, press the call control button on the headset, then hang up the handset.

NOTE: If either you or the recipient have trouble hearing, please check compatibility (page 13).

10

11