Muting the headset
You can mute/unmute the headset in the following ways:
HeadsetBase
Conferencing in up to three additional headsets
While on a call, you can subscribe up to three additional headsets to your base for conferencing. As you add headsets to the base, an additional headset icon will appear in the Plantronics Software
Press the volume down button (at least 1½ seconds) until the base talk button indicator light for the active call becomes solid red.
Briefly pressing (less than one second) a red desk phone or PC talk button on the base will unmute the headset. You cannot mute the headset using the desk phone or PC talk buttons.
screen with a number from 1 to 3 indicating the number of additional headsets subscribed to the base.
Guests may conference in as described below:
1 While you are on a call: |
a) Place the guest's headset into primary user's |
charging cradle. |
Subscribing a master headset
The headset and base are subscribed to each other at the factory. In the event that you need to subscribe a new master headset
to the base you can do so one of two ways. You can subscribe a master headset to the base with the headset docked (secure subscription) or undocked
Headset docked | Headset undocked |
OR
b)Place the guest's headset into
2 | Briefly press (less than one second) the subscription |
| button on the base. |
| The subscription light will flash yellow and green. |
3 | The subscription light will then turn solid yellow and you |
Double press the subscription button on the base. The subscription light will flash red and green.
When the subscription light becomes solid green, the headset and base are subscribed to one another.
Double press the subscription button on the base. The subscription light will flash red and green. Press the volume up button on the headset for three seconds until the indicator light turns solid green.
When the subscription light on the base becomes solid green, the headset and base are subscribed to one another.
will hear a tone in the master headset indicating that a |
guest wishes to join the call. |
4 If you press the call control button on the master |
headset within five seconds, the guest is joined to the |
call. |
If you do not press the call control button within five seconds, |
the request to join the call is rejected and the guest will hear an |
error tone in their headset. |
5 Guests may leave the conference call by pressing their |
call control button. |
Note If the subscription process times out after two minutes or if the subscription process fails, the subscription light will become solid red for four seconds and then return to its previous state. If this occurs, try to subscribe the headset again.
When they do you will hear a single tone in the master headset as each guest leaves the call.
To see how many headsets are subscribed to the base, refer to the lower
123
Plantronics Savi User Guide | 15 |