Plinius Audio 8100 manual WATTSRMS PER CHANNEL INTO 8 OHMS, WATTSRMS PER CHANNEL INTO 4 OHMS

100-WATTS RMS PER CHANNEL INTO 8 OHMS.

140-WATTS RMS PER CHANNEL INTO 4 OHMS.

BOTH CHANNELS DRIVEN FROM 20Hz TO 20kHz AT LESS THAN 0.1% TOTAL HARMONIC DISTORTION.

SDYNAMIC HEADROOM: 1dB or greater at 8Ω with music.

SFREQUENCY RESPONSE: 20Hz to 20kHz ±0.2dB. 0dB at 0Hz and -3dB at 70kHz.

SDISTORTION: Typically <0.05% THD at rated power. 0.1% THD and IM worst case prior to clipping.

SSATURATION: 140W per channel or greater into 8Ω.

SCURRENT OUTPUT: 20A short duration peak per channel. Fuse protected.

SRISE TIME: Typically 5∝s.

SSLEWING: 50V/∝s.

SHUM & NOISE: 90dB below rated output 20Hz to 20kHz unweighted.

SINPUT SENSITIVITY: 290mV RMS for rated output at 1kHz.

SINPUT IMPEDANCE: 47kΩ.

SINPUT OVERLOAD: 5V RMS.

SRATED PRE OUT LEVEL: 1.5V RMS into 47kΩ or higher.

SPRE OUT SOURCE IMPEDANCE: Typically 5kΩ.

SPRE OUT MINIMUM RECOMMENDED LOAD: 47kΩ.

STAPE OUTPUT LEVEL: Unity Gain at 200Ω. Tape loop muting at 5V RMS input.

SHEIGHT: 105mm (4")

SWIDTH: 450mm (17 3/4")

SDEPTH: 390mm (15 1/3")

SWEIGHT: 9.5kg (21lbs)

16