IMPORTANT: DO NOT FIT A FUSE WITH A HIGHER RATING.

In the unusual event that this fuse should blow, you must first establish the cause of this failure (such as power surges, damaged mains cable, etc) before replacing the

fuse with one of the same rating and t ype. Should the amplifier continue to suf fer mains fuse failure, contact your Plinius dealer.

OVER TEMPERATURE PROTECTION

The Anniversar y Integrated Amplifier is fit ted with an auto -reset thermal sensor. The sensor is located at the main power t ransformer and should the t ransformer internal temperature exceed 1 10°C (230°F ) the power will be disconnected from the unit.

The unit will remain of f until the temperate has reduced significantly, and then the sensor will automatically reset to the ON state.

If Over Temperature Protection occurs you should switch the unit of f immediately. Check the placement of the unit and ensure there is adequate air flow above and around the unit. Refer to the Placement & Ventilation section on page 4 for fur ther information.

18

PLINIUS ANNIVERSARY