Plinius Audio SB-301 manual Input/Output Connection, Rca Stereo, Am Plifier Configuration Selector

INPUT/OUTPUT CONNECTION

RIGHT OUTPUTS

RIGHT INPUTS

+

RCA STEREO

LEFT OUTPUTS

LEFT INPUTS

+

XLR STEREO

+	AM PLIFIER CONFIGURATION SELECTOR	+
	REFER TO OW NERS MANUAL FOR USAGE INSTRUCTIONS

REAR PANEL SHOWING LOCATION OF INPUT/OUTPUT TERMINALS

It is important that you connect your loudspeakers (outputs) and preamplifier or processor (inputs) to the Plinius SB-301 Power Amplifier correctly to ensure the amplifier is not damaged, and sounds it’s best with your system. Now that you have read and familiarised yourself with the connections on the back of the amplifier as covered in the previous section, we will describe in detail the different ways in which you can connect the amplifier to your system.

There are essentially two different ways that you can connect your system components to the Plinius SB-

301 Power Amplifier:

1.RCA STEREO

2.XLR STEREO

RCA STEREO

Connect your processor or input signal to the two RCA inputs at the top of the amplifier back panel. Make sure you connect the red coded cable to the red RIGHT RCA input and the black (or white) cable to the black LEFT RCA input. Also make sure the RCA connectors are a snug fit and are inserted all the way in.

Next connect your loudspeaker wires to the output posts on either side of the rear panel. Connect your right loudspeaker (ie the one on the right of you when seated in your normal listening position) to the right output terminals, ensuring that the red positive (+) terminal is connected to the red terminal on your loudspeaker. Do the same with the black or negative (-) terminals.

Now turn the ACS switch clockwise so that it is in the RCA Stereo position. It is now safe to switch on your amplifier.

12