PLUS Vision U3-1100, U3-1100SF, U3-1100W, U3-1100WZ, U3-810, U3-810SF, U3-810W, U3-810WZ 1 2, 3, 12, 11, 10, 4, 5, 6, 7, 8, 9

E – 22

The picture elements such as brightness, contrast, white

balance, and so on can be adjusted individually for each

input source. The adjustable items vary depending on the

input source.

(The elements marked with “ ” are adjustable.)

Input source

VIDEO/S-VIDEO CONPONENT VIDEO RGB

BRIGHTNESS

CONTRAST

COLOR –

TINT ––

SHARPNESS ––

The elements marked with " " are adjustable.

The element marked with " " is adjustable for NTSC and

NTSC4.43 only.

The elements marked with "-" are not adjustable.

1Select the input source (see page 16)

2Press the MENU button to display the

menu, hold down the cursor 왗 / 왘 keys or

the MENU button and then select “IM-

AGE”.

3Press the cursor 왖 / 왔 keys to select

“BRIGHTNESS”.

The items that appear in the menu will differ

depending on the input.

4Press the cursor 왗 / 왘 keys to adjust the

brightness.

5Press the cursor 왖 / 왔 keys to select

“CONTRAST”.

6Press the cursor 왗 / 왘 keys to adjust the

contrast.

Some elements are not adjustable for Video, S-

Video and Component (YCbCr) signal in the

procedures from Step 7.

Elements that are not adjustable are not dis-

played.

Adjusting the picture elements

To select other menu names

Press the MENU button. The cursor

will disappear and the menu selection

screen will be displayed.

To close the menu

Press the CANCEL button.

7Press the cursor 왖 / 왔 keys to select

“COLOR”.

8Press the cursor 왗 / 왘 keys to adjust the

color.

9Press the cursor 왖 / 왔 keys to select

“TINT”.

Note

This adjustment is not possible with color systems other than

NTSC and NTSC4.43.

10

Press the cursor 왗 / 왘 keys to adjust the

tint.

11

Press the cursor 왖 / 왔 keys to select

“SHARPNESS”.

Note

This adjustment is not possible with YCbCr signal.

12

Press the cursor 왗 / 왘 keys to adjust the

sharpness.

Contents

Main Applicable Models: U3-1100WZ, U3-1100W, U3-1100SF U3-810WZ, U3-810W, U3-810SF U3-1100/U3-810 DATA PROJECTOR PLUS USERS MANUAL English RF Interference WARNING IMPORTANT SAFETY INFORMATION Cleaning Lamp Replacement Table of contents Basic information and preparations........ 4 Connections ............................................ 10 Operation................................................. 14 Menu operation....................................... 20 Page Features Checking the supplied accessories Basic information and preparations Preparing the remote control Inserting the batteries Remote control effective range Parts and controls Top, front and side panel view Bottom Control panel Rear and side panel view Terminal Panel Built-in Security Slot Wireless Remote Control PLUS Parts and controls (continued) Installation E 9A A non-glossy wall may be used as a substitute for a screen. WARNING Installation Guidelines (normal installation) Distance and image size for U3- 810WZ and U3- 1100WZ The drawings show the image sizes and distances for tele and wide. E 9B Projection distance and screen height for U3-1100WZ Projection distance and screen height for U3-810WZ Connecting video equipment Connections Connection to the VIDEO jack of the unit Connection to the S-VIDEO jack of the unit E 11 Connecting Video Equipment With Component Video Signal (YCbCr) Output Connection to the RGB/YCbCr connector E 12 Connecting a PC or Macintosh Changing the computers video resolutions Notebook computers and resolution standards Outputting Notebook Type Personal Computer External Output Signals Using the unit Operation 1 2 POWER on top of the unit, to turn on the unit. 1 3 6 7 [U3-1100W, U3-1100SF, U3-810W, U3-810SF] [U3- 1100WZ, U3- 810WZ] 8 1 VIDEO 2 RGB 3 1 control or the POWER button of the main unit for a few seconds. 2 Using the unit (continued) E 17 Using the Remote Control as the PC Mouse USB Port Connection IBM PS/2 Mouse Port Connection Various functions while using the unit Automatic Screen Adjustment MUTE Press the AUTO button. Freezing animated images Enlarging the picture Press ZOOM + button. Screen Reduction Press ZOOM button. When this button is released, the screen will return to 90% reduction. To move to the desired portion of the enlarged picture Use as a High-Brightness Monochrome Projector Slide the COLOR B/W switch to either the COLOR side or the B/W side. COLOR Side B/W Side Menu Structure Menu operation Page 1 2 3 12 11 10 Adjusting the projected image from the computer Timing Chart Manual Adjustment of Personal Computer Images Adjusting Clock Frequency and Phase 1 2 3 4 5 6 1 2 3 Resetting the Lamp Hours of Usage Resetting the time the hours of lamp usage 1 2 3 When the power will not turn on because the lamp usage hours of has exceeded 1100 hours 1 2 Setting the Cinema Mode 2 Selecting the Color System 1 4 Setting Narrow Images (Advanced Menu) 2 Setting the Display Frame 1 3 4 2 Setting in Accordance With Image Contents Setting in Accordance With Image Contents (continued) Initial Settings Setting Keystone 3 Setting the partial display position 2 3 Audio Muting 1 Selecting the Background 2 3 Auto Gain 1 3 Using the Power Saving Function 2 3 Auto Source Settings 2 Selecting a Projection Type 3 Selecting a Menu Language 3 Setting the Menu Display Position 3 Setting the Menu Menu Viewing Settings 3 Other Menu Settings 3 On-screen Display 3 Troubleshooting Others Status Light Messages When the STATUS indicator lights or flashes Lamp cartridge replacement procedure Replacing the lamp cartridge E 34 Optical Electrical Mechanical Specifications D-Sub Pin Assignments PC 15-Pin mini D-Sub Dimensions