E – 28

Setting in Accordance With

Image Contents (continued)

Initial Settings

Setting Keystone

This is used to set the height for keystone adjustment.
1With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor 왗 / 왘 keys to select “VIEW”.
2Display the frame, then use the cursor 왖
/ 왔 keys to select “KEYSTONE”.
3Use the cursor 왗 / 왘 keys to select “NOR-
MAL” or “FULL”.
●Normal: normal keystone correction
●Full: In this mode, the image is enlarged to fill
the screen vertically and then Keystone correc-
tion is performed.

Setting the partial display position

Input a signal that is rated SXGA (XGA for the U3-810WZ,
U3-810W, U3-810SF) to RGB/YCbCr connector and then set
the partial display position with ASPECT (described later) set
to Real.
1With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor 왗 / 왘 keys to select “VIEW”.
2Display the frame, use the cursor 왖 / 왔
keys to select “PAN” and then press the
ENTER button.
3Use the cursor 왖 / 왔, 왗 / 왘 keys to set the
display position.

Audio Muting

Audio only can be muted for each input.
This function is convenient when multiple video units are
connected to this projector.
1Select the input to be muted (page 16).
2With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor 왗 / 왘 keys to select “SETUP”.
3Use the cursor 왖 / 왔 keys to select
“SOUND MUTE”, then use the cursor 왗 /
왘 keys to set muting to ON or OFF.

Selecting the Background

Two different backgrounds can be selected for projection
when there is no signal input.
1With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor 왗 / 왘 keys to select “SETUP”.
2Use the cursor 왖 / 왔 keys to select
“BACKGROUND”.
3Use the cursor 왗 / 왘 keys to select one of
the following backgrounds.
● Blue ● Black

Auto Gain

Brightness and contrast are adjusted automatically.
1Select the input to be set for auto gain
(page 16).
2With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor 왗 / 왘 keys to select “SETUP”.
3Use the cursor 왖 / 왔 key to select “AUTO
GAIN”, then use the cursor 왗 / 왘 keys to
set ON or OFF.
To select other menu names
Press the MENU button. The cursor will disappear and the menu
selection screen will be displayed.
To close the menu
Press the CANCEL button.