PLUS Vision U5-432 user manual Finishing, Unplug the power cable, Standby button on main unit

Models: U5-432

1 70
Download 70 pages 42.56 Kb
Page 25
Image 25

Power Cable Connections and Switching the Power On/Off

Finishing

1 Switch off the power of the connected equip- ment

2 Switch off the power of the projector

Press the STANDBY button.

STANDBY (button on main unit)

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen will go off (in about 5 seconds) and the projector will enter the power-off operation.

Note

*The operation can be cancelled by pressing a button other than the STANDBY button.

*One more press of the STANDBY button will switch off the power.

The STANDBY indicator changes to flashing amber and lights a steady amber after about 90 seconds (when the unit enters the standby mode).

STATUS

STATUS

STATUS

STANDBY

STANDBY

STANDBY

 

Flashing amber

Lit amber

Lit green

(Approximately 90

Standby mode

 

seconds)

 

 

3 Unplug the power cable

Check that the STANDBY indicator is lit in amber and then unplug the power cable.

The STANDBY indicator will go off when the power cable is un- plugged.

STANDBYLASER

RGB VIDEO AUTO

MENUQUICK

Q

Power Off

OK ?

Warrning

Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp or damage the projector.

E-25

Page 25
Image 25
PLUS Vision U5-432 user manual Finishing, Unplug the power cable, Standby button on main unit