PoGo Products Radio Charging the Battery, Setting the Time, Using a Memory Card, Setting the Date

IMPORTImportantANT INFORMATIONInformation

1)Use the supplied USB cable to connect your Radio YourWay LX to your computer. The CD included with your Radio YourWay LX is not required if you are using Windows XP, 2000, or ME. However, if your computer uses Windows 98 you will need to install drivers that are found on the CD.

2)If no buttons are pressed within 20 seconds while in a Menu or Timer screen, the Radio YourWay LX will “time out” and return to the opening screen. All recent changes will be lost. For example, if you press the menu button, but you do not select a menu option within 20 seconds your Radio YourWay LX will return to the mode screen it was in prior to the menu button being pressed.

3)By default the Radio YourWay LX will turn itself completely off after three minutes if unused.

4)Before you start we recommend formatting the internal memory of the Radio YourWay LX and SD card, if you purchased one:

•Turn the Radio YourWay LX on by pressing the i/ $ (play) button for three seconds.

•Press the Menu button.

•Press y (down) and scroll to “INT FORMAT #6” (or for an SD card “EXT FORMAT #7”). Press the i/ $ (play) button to select.

•Press GG (left) to check the YES box.

•Press Y / $ (play) to confirm and you’re ready to go!

Charging the Battery Setting the Time

Please fully charge the battery prior to using the Radio YourWay LX. The battery can be charged using the AC adapter, or by connecting it to a PC or MAC with the included USB cable. It takes approximately 4 hours to fully charge the battery using either method.

FULL BATTERY LOW BATTERY

•Make sure you always have enough battery power. After 1 or 2 hours of the battery being fully discharged, the year/day/hour settings are all lost and must be set again.

•In order for timer recordings to function properly, the correct time and date must be set. See below for Setting the Date.

Press MENU and select “Time Set” using the Y / $ (play) button. You will now see a screen similar to the one shown below.

To change the hour and minute use the t (up) and I (down) buttons. To move between the hour and minute fields use the

GG(left) and HH (right) buttons. Push the Y / $ (play) button to confirm the date you have set is correct.

Copyright © C.Crane Company, Inc. 2006

Using a Memory Card

When inserting an SD memory card ensure that the card is inserted properly as shown in the diagram (taking note of the correct side up) or you may damage the card and/or external card slot.

By pushing the A-B REPEAT button, you can switch between the internal memory of the Radio YourWay and the SD memory card. The small icon showing “INT” or “SD” located above the month will indicate the current memory mode you are using.

Setting the Date

Press MENU and scroll to “Calendar” using the I (down) button. When “Calendar” is highlighted press Y / $ (play).

You will now see a screen similar to the one shown below.

To move between the Year/Month/Date fields use the U (up) and I (down) buttons. To change the Year/Month/Date use the GG (left) and HH (right) buttons. Push the Y / $ (play) button to confirm the date you have set is correct.

To exit the MENU screen, press the MENU button.