Using the DMC camera 25
Using the DMC camera

Typical DMC workflow

To help you immediately begin using the DMC camera, a
typical workflow sequence is presented below. (After you
become familiar with DMC operation and features, you can
use the camera in the way that best suits your imaging
needs.)
1Start your imaging application or DMC Direct.
2If you are using an imaging application, use the Acquire or
Import command to launch the DMC interface.
3View the subject through the microscope eyepiece, and focus
and position it as desired.
4In the DMC window on your computer display, fine-tune
subject focus and select shutter and film speed, color
temperature and other options.
5If necessary, click the Capture and Enhance button and
adjust color balance, contrast, brightness or sharpening.