- - 37
Using the supplied audio cables, connect the AUDIO OUT jacks (LEFT/RIGHT) on the
unit with the AUDIO IN jacks (LEFT/RIGHT) on your Television set
a. Turn on the unit
b. Press the SETUP button
c. Press the Down arrow button three times to highlight “Setup Menu”
d. Press the Right arrow button once
e. Press the Down arrow button four times to highlight “Speaker”
f. Press the ENTER button
g. Press the Right arrow button once to select “Down Mix”
h. Press the Up arrow button twice to highlight “Lt/Rt”
i. Press the ENTER button to select “Lt/Rt”
j. Press the SETUP button to exit
11. The player isn���t playing.
The first thing to do is make sure that the disc cover is close and a disc is loaded. Other problems might
include the disc being loaded upside down or the disc is dirty or warped. Also check to see if the player’s
region code is the same region code of your DVD disc.
12. There’s no picture or sound…what’s wrong?
Check to see if your system connection is correct. Then check to see if your speakers have power. Other
problems might include the disc being loaded upside down or the disc is dirty or warped. Also check to see
if the DVD player’s region code is the same region code of your DVD disc. If that’s not it, make sure your
DVD player isn’t muted.
13. I can’t get a picture on the TV?
Make sure you check all connections, particularly the ones between your TV and the DVD player. If that’s
not the problem, check to see if your TV is turned on and is on the correct video setting. Also check to make
sure your TV and speakers work properly and that your TV is not muted. And make sure that the
progressive scan/interlace of the DVD player is set to match the display device. Press the PS button on the
remote control to shift between progressive scan and interlace mode.
14. OK, it’s playing but it keeps playing the same section over and over!
Is the DVD in A-B status? If it is, press the A-B button to cancel it. That should do the trick. Otherwise make
sure your disc is clean and not warped.
15. The picture moves up and down…
Check to make sure your signal system is correct.
16. High humidity has given my player some water condensation! What now?
It’s not the end of the world. Try taking out the disc and leave the player on for at least an hour. That should
dry things out enough for normal operation.
17. The remote control doesn’t seem to function.
Make sure you are pointing the remote directly at the remote sensor. The remote requires an unobstructed
line-of-sight “connection” to your DVD player to work properly. If that’s not the problem, make sure you have
new batteries in the remote and that the batteries are inserted correctly into the remote control.
18. Everything seems to work OK, but I’m not happy with the picture and sound performance…
Check your disc. Make sure it’s not dirty, warped or damaged. If you’re playing an MP3, make sure the files
were created with sufficient compression quality.
19. I’m getting a lot of static…what do I do now?
Optimal radio reception requires a correct antenna connection. Is yours connected correctly? Also make
sure your antenna fully extended and away from the system and other equipment. You can also try
unplugging your receiver to reset the player.