Prog. Swap (submenu)

Swap between two programs and their channels. This can be done by pressing Switch button after two different channels are selected.

Program

Display the current program’s channel number

Name

Rename the program with four colored buttons on the remote control

1for Capitalized English letters

2for Alphanumeric numbers from 0 to 9 3for special characters as “#”

4Resuming “*” in unnamed mode UseVOL+/VOL-to input and select the characters

Note: In PC signal mode, there are 2 options of Language and Child Lock in the Setup menu. In AV/S-VIDEO/YPbPr signal mode, there are 3 options of Language,Blue Back and Child Lock.

Tune

PressCH+】【/ CH-to select the Tune menu. There are altogether 7 items to adjust: Auto Search, Search, Band, Fine Tune, Color System, Sound System and Skip.

Auto Search

In Auto Search mode

1.The TV does auto-search and stores programs from VHF-L to UHF.

2.During search, all programs searched are automatically stored.

3.When the search is done or when all 236-program positions are occupied, or you have pressed MENUduring the search process, the search will halt and the TV will return to the Tune menu with channel 1.

Search

In Search mode, pressVOL+/VOL-so that the TV manually searches the upper or lower program position until one program was searched and automatic storage will commence. If

the program is not needed, then pressVOL+/VOL-again. After pressing MENU, the TV

will exit from Search and return to the menu.

Band

To set which band the current program belongs to.

Fine Tune

In Fine Tune mode, pressVOL+/VOL- to until the best picture and sound is achieved. After adjusting, the TV will auto-store the channels. Press MENUto exit and return to the Tune

menu.

12

Page 13
Image 13
Polaroid FLA-1512B manual Ⅳ Tune