Chapter 2 Installing the LCD TV
METHOD A:
Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE terminal.
TV | HDTV |
CABLE | AIR |
VHF/UHF IN | |
| B |
METHOD B: | A |
|
Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s HDTV AIR terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
TV | HDTV |
CABLE | AIR |
VHF/UHF IN | |
Press the 
button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.
Press the Source button on the remote to display the Input List. Use the ▲► buttons to select TV( METHOD A), or HDTV (METHOD B), and press the OK button.
Main
TV(CABLE/AIR) HDTV (CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3
COMPUTER (VGA)
18
