Troubleshooting
User’s Guide
P–500
11
Troubleshooting Printer does not function at all.
The film pack is not in the printer.
•Load the film pack into the printer.
The battery in the film pack is too low or
dead.
•Replace the film pack.
Environment is very cold, causing reduced
performance.
•If using the printer at temperatures below
55°F(13°C)
, keep film packs warm, then load
just before use.
Printer does not print when I press Print .
The default image number is “000.”
•Select an image to print.
The film pack is jammed.
•Open the film compartment, clear the jam, and
turn the printer on. The exposed frame ejects.
The film pack is empty.
• Insert a new film pack.
The battery in the film pack is too low or
dead.
•Replace the film pack.
Some images printed, but then the printer stopped.
A partially used film pack was loaded which
defaults the film count to 10. Although the
printer allowed you to program 10 images,
the film ran out.
•Insert a new film pack.
The battery in the film pack is too low.
•Replace the film pack.
P500_UG_Final.fm Page 11 Wednesday, October 18, 2000 4:21 PM