2Simultaneously press and hold the Power button and the Auto
Focus button until “restored” appears on the LCD panel
(about 2 seconds), then release the buttons.
3Transfer the pictures you want to keep to your computer (see
page 69 for Macintosh or page 91 for PC).
Note: Restoring pictures is likely to change the picture
numbers. Use care in choosing the pictures to be transferred.
4Erase all the pictures from the camera. (See Erasing all
pictures on page 57, or see Chapter 4 or 5 to use your
computer for erasing the pictures.)
Note: Because this procedure restores all pictures on the
camera’s storage disk, the LCD displays “disk full” if you
attempt to take additional pictures without performing steps
3 and 4.
Using the PDC-2000 camera 59