Polaroid PDC-2000 Using the PDC-2000 with your Macintosh 77

Expert preferences You can choose to transfer pictures from
the camera to an image processing application or directly to a
file on disk, to keep the PDC-2000 plug-in active or close it
after each transfer operation, and to disable display of
thumbnail images from the camera for faster plug-in launch.
Changing the preferences To change any of the preference settings described above:
1Connect the PDC-2000 camera to the computer as described
on page 17.
WARNING: DO NOT CONNECT OR DISCONNECT THE
PDC-2000 CAMERA OR ANY OTHER SCSI DEVICE
WHILE THE DEVICE OR YOUR COMPUTER IS TURNED
ON. DOING SO COULD DAMAGE THE DEVICE, YOUR
COMPUTER, OR BOTH.
2Turn on the camera by pressing the Power button (a).
3Turn on the computer.
4Start an image-processing application compatible with
Photoshop plug-in modules or start Polaroid PDC-2000
Direct.
5If you are using PDC-2000 Direct, skip to step 6.
If you are using an image-processing application, choose
Acquire from the File menu, then choose PDC-2000.
Using the PDC-2000 with your Macintosh 77