Power Supply

Preparation

Using the AC Adapter

The player is supplied with an AC adapter for powering the unit and charging the battery.

1.Connect AC adapter to the right side of the DVD player in the jack marked DC 9.5V IN, as shown on the right.

2.Plug the two-prong end of the power cord into a grounded electrical outlet. The power indicator lights red.

Note: Turn player's power off before unplugging.

Note: In the case of using the adapter, the LCD screen will be lighter than with the rechargeable battery.

Using the Car Adapter

The player is supplied with a Car Adapter for powering the unit and charging the battery while in a vehicle.

Connect the Car Adapter Power Plug to the unit's power jack and plug the other end to the vehicle’s 12V accessory / cigarette socket, as shown on the right figure.

Attention

¾Do not operate the unit or view video software while driving a vehicle.

¾Place the unit in a proper position for viewing.

¾Detach the battery pack when using the AC or car adapter as the power source.

¾Disconnect the player from the Car Adapter when starting the vehicle.

20

Page 20
Image 20
Polaroid PDM-0723 operation manual Power Supply Preparation, Using the AC Adapter, Using the Car Adapter