Remote Control

Preparation of Remote Control

Follow the steps below to install the battery.

1.Pull the battery holder out from the remote control in the direction of the arrow.

2.Load a new battery properly with the (+) sided up.

3.Insert the battery holder back into the remote control.

Battery type: CR2025 3V

Battery service life: approximately 1 year under normal use (at room temperature).

Use of Remote Control

Point the remote control unit to the remote sensor within the range of 16 feet and angles of 60 degree, and without obstacles between remote control and remote sensor.

Note

¾Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or a fire. Battery leakage may damage the remote control.

¾Do not expose the remote control unit to direct sunlight.

¾Do not recharge, disassemble, deform or heat the battery.

¾Do not put the battery in fire or water.

¾Immediately replace the exhausted battery.

¾Take out battery when the remote is not in use for a long time.

15

Page 15
Image 15
Polaroid PDM-0743M operation manual Preparation of Remote Control, Use of Remote Control