Disc Play Operations
Basic operation
Preparation
After the connections have been made, turn on the relevant equipment and select the desired video input before playback.
Open the LCD screen
Press the button on the main panel, lift the LCD screen upward.
Turn on the player’s power
Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. When power is on, the player will search the disc automatically, if there is a disc loaded, the player will start to play it automatically.
POWER
OFF | ▲ ON |
Press OPEN button on front panel to open the disc cover.
OPEN
Load the disc into the disc tray with the label side up, see the figure below. Load the disc as shown in order not to damage the player or the disc.
Close the disc tray cover so that it clicks. Playback will start automatically. During DVD playback, depending on discs, it will start playback directly or there will be a DVD menu or title menu displayed on the screen.
During CD disc playback, the unit will play the tracks in sequence.
18
