Basic Operation
Turning on the power
Check that the AC switches on the back of the PDP and the
1.Press PWR on the Plasma Display and
2.Confirm that the STANDBY indicators light up red, and then press TV on the remote control unit or STANDYBY/ON on the right side of Plasma Display to turn the system on. The POWER ON indicators on the Plasma Display and
Note
In this manual, “system” means the Plasma Display Panel and the Media Receiver
Turning off the power
Press PWR button on the remote control or STANDBY/ON button on the right side of the PDP. The power LEDs on the PDP and the
CAUTION
Before disconnecting any system cables, turn the PDP off (put into Standby Mode) and turn the AC switches to “0”.
Note
If the PDP is not to be used for a long period of time, unplug the AC cord from the wall outlet.
15