Troubleshooting
Problem | Possible Solution |
|
˙No picture. |
|
|
Can not see video at VIDEO 1,2,3 | • Select source again. | |
Cannot receive any channels. | • Make sure the power cord is connected | |
securely.
•Turn on the power of the PDP.
•Check antenna/cable connections.
______________________________________________________________
˙TV is locked to one channel. • Perform Auto Program to add receivable channels that are not presently in the PDP’s memory.
Cannot receive any channels | • Run Auto Program to add receivable |
when using cable TV. | channels that are not presently in the PDP’s |
memory. | |
Cannot receive or select | • Run Auto Program to add receivable |
channels. | channels that are not presently in the PDP’s |
memory. | |
Can not see any information | ˙Turn off AC power of Box and PDP, |
on display (OSD and video) | and turn on again. |
and the power LED is blue. |
|
|
|
˙Poor picture |
|
Double images or ghosts. | • Check antenna/cable connections. |
• Check the antenna location and direction. | |
˙Only snow and noise appear | • Check if the antenna is broken or bent. |
on the screen. | • Check if the antenna has reached the end of |
its serviceable life.
______________________________________________________________
˙No color. | • Press MODE to select the desired Picture |
| Mode. |
˙Color is not correct. | • Adjust the Picture Mode options in the |
Dark picture | Video menu. |
_____________________________________________________________
38
