Guide to better pictures 17
Repeated spots or | Cause | Solution |
bar pattern |
|
|
•Developer rollers inside the film door need to be cleaned.
•Open film door in indirect light (do not remove film). While turning rollers, clean them with a
Damaged picture | Cause | Solution |
•Picture was shaken back and forth or bent shortly after it ejected from the camera.
•Picture was left in the exit slot, and camera was set down on a table or other surface.
•During first 60 seconds of development, handle print gently; hold it only by its wide white border, and do not wave or bend it.
•Remove print from exit slot as soon as it ejects.
