10.Check to see if the error has been resolved.

If the error has been resolved, then there is a problem with the tri-color print cartridge.

If the error has not been resolved, then there is a problem with both print cartridges.

11.Open the print cartridge door and reinsert the tri-color print cartridge by sliding it forward into the slot on the left. Then push the print cartridge forward until it clicks into the slot.

12.Close the print cartridge door.

Solution 1: Remove and reinsert the print cartridges

Solution 2: Clean the print cartridge contacts

Solution 3: Replace the print cartridge

Solution 1: Remove and reinsert the print cartridges

Solution: Remove and reinsert the print cartridges and verify that they are fully inserted and locked in place.

Also, make sure the print cartridges are installed into the correct slots.

To make sure the print cartridges are installed correctly

1.Make sure the product is turned on.

CAUTION: If the product is turned off when you open the print cartridge door to access the print cartridges, it will not release the cartridges for changing. You might damage the product if the print cartridges are not docked safely when you try to remove them.

2.Open the print cartridge door.

The print carriage moves to the far right side of the product.

Troubleshooting

3.Check to make sure you are using the correct print cartridges for your product. For a list of compatible print cartridges, see the printed documentation that came with the product.

Errors 265