Chapter 14

NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

If there is ink remaining in the print cartridges, but you are still noticing a problem, print a self-test report to determine if there is a problem with the print cartridges. If the self-test report shows a problem, clean the print cartridges. If the problem persists, you might need to replace the print cartridges.

For more information, see:

Check the estimated ink levels” on page 98

Print a self-test report” on page 114

Clean the print cartridges” on page 107

Cause: The print cartridges needed to be cleaned or there was insufficient ink.

Troubleshooting

Ink is not filling the text or graphics completely

Try the following solutions if the ink is not filling the text or image completely so that it appears that parts are missing or blank.

Solution 1: Check the print settings

Solution 2: Check the paper type

Solution 3: Make sure you are using genuine HP print cartridges

Solution 4: Check the print catridges

Solution 5: Replace the print cartridge

Solution 1: Check the print settings

Solution: Check the print settings.

Check the paper type setting to make sure it matches the type of paper loaded in the input tray.

Check the quality setting. Use a higher quality setting to increase the amount of ink used for printing.

For more information, see:

Set the paper type for printing” on page 53

Change the print speed or quality” on page 54

Print using Maximum dpi” on page 60

Change copy speed or quality” on page 88

Cause: The paper type or print quality settings were set incorrectly.

If this did not solve the issue, try the next solution.

Solution 2: Check the paper type

Solution: HP recommends that you use HP papers or any other paper type that is appropriate for the product.

136 Troubleshooting