Philips HTP3350K/55 Audio. Audio is, Downmixed to two, Channel sound see, Lpcm Output setting

[ Analog Output ]

Select the analog audio setting based on the audio device that is connected through the analog audio jack.

•[ Stereo ] – for stereo output.

•[ LT/RT ] – for surround sound output through two speakers.

[ Digital Audio ]

Select the setting based on the digital amplifier/receiver that is connected through the digital jack.

•[ Digital Output ] – select the type of digital output.

Option	Description
[ Off ]	Disable digital output.
[ All ]	The device supports
	multi-channel audio
	formats.
[ PCM Only ]	The device is not capable
	of decoding multi-channel
	audio. Audio is
	downmixed to two-
	channel sound: see [
	LPCM Output ] setting.

•[ LPCM Output ] – select the LPCM (Linear Pulse Code Modulation) output sampling rate.

Option Description

[ 48kHz ] For discs recorded at sampling rate of 48 kHz.

[ 96kHz ] For discs recorded at the sampling rate of 96 kHz.

Note

•[ LPCM Output ] setting is only available if the [ Digital Output ] is set to [ PCM only ].

•The higher the sampling rate, the better the sound quality.

[ Volume ]

Set the default volume level when you play

adisc.

1.Press OK.

2.Press b B to set the volume.

3.Press OK to confirm and exit.

[ Sound Mode ]

Select a preset sound effect to enhance the audio output.

•[ 3D ] – select a virtual surround sound effect that is produced from the left and right audio channels.

•[ Movie Mode ] – select a sound effect for movies.

•[ Music Mode ] – select a sound effect for music.

[ CD Upsampling ]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

•[ Off ] – turn off CD-upsampling.

•[ 88.2kHz (X2) ] – convert to twice the original sampling rate.

•[ 176.4kHz (X4) ] – convert to four times the original sampling rate.

Adjust settings English

EN 29