Chapter 14
Cause: Transparencies and some other media require a drying time that is longer than normal.
Out of paper
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•Solution 1: Replace the rear door
•Solution 2: Make sure the paper is loaded correctly
•Solution 3: Check the print settings
•Solution 4: Clean the paper feed rollers with the HP Paper Feed Cleaning Kit
•Solution 5: Clean the rollers
•Solution 6: Contact HP support for service
Solution 1: Replace the rear door
Solution: If you removed the rear door to clear a paper jam, replace it. Gently push the door forward until it snaps into place.
Troubleshooting
Cause: The rear door was removed from the product.
If this did not solve the issue, try the next solution.
Solution 2: Make sure the paper is loaded correctly
Solution: Make sure that the paper is loaded correctly in the input tray. For more information, see:
Cause: The paper was not loaded correctly.
If this did not solve the issue, try the next solution.
238 Troubleshooting