Carriage blocked

Solution: Turn off the product and open the print cartridge door to access the print carriage area. Remove any objects that are blocking the print carriage (including any packing materials), and then turn on the product again.

Follow the prompts on the display to continue.

Cause: The print carriage was blocked.

Firmware revision mismatch

Solution: Contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: The revision number of the product firmware did not match the revision number of the software.

Memory is full

Solution: Try making fewer copies at a time.

Cause: The document you were copying exceeded the memory of the product.

Photo tray problem

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Load more paper in the photo tray

Solution 2: Make sure paper is loaded correctly in the photo tray

Solution 3: Remove excess paper from the photo tray

Solution 4: Make sure the sheets of paper are not stuck together

Solution 5: Make sure the photo paper is not curled

Solution 6: Load one sheet of paper at a time

Troubleshooting

Errors 189

Page 192
Image 192
HP C5500 manual Carriage blocked, Firmware revision mismatch, Memory is full, Photo tray problem