Chapter 4

This section contains the following topics:

View and print Bluetooth settings

Change the device name

Set Bluetooth security for the HP All-in-One

Reset Bluetooth settings on the HP All-in-One

Finish setup

View and print Bluetooth settings

You can view and print the Bluetooth settings for the HP All-in-One through the HP All- in-One control panel.

To view and print Bluetooth settings

1.Press Setup.

2.Press the down arrow button until Bluetooth is highlighted, and then press OK.

3.Press the down arrow button until View and print Bluetooth settings is highlighted, and then press OK.

The product shows the Bluetooth settings on the display and then prints them.

The following table describes the Bluetooth settings shown on the configuration page.

Parameter

Device Address

Device Name

Passkey

Visibility

Security

Description

The hardware address of the Bluetooth device.

The device name assigned to the product, which can identify it on a Bluetooth device.

A value that the user must enter in order to print via Bluetooth.

Shows whether or not the HP All-in-One is visible to Bluetooth devices that are within range.

Visible to all: Any Bluetooth device within range can print to the HP All- in-One.

Not visible: Only Bluetooth devices that have stored the device address of the HP All-in-One can print to it.

The level of security set for an HP All-in-One connected by Bluetooth.

Low: The HP All-in-One does not require a passkey. Any Bluetooth device within range can print to it.

High: The HP All-in-One requires a passkey from the Bluetooth device before allowing the device to send a print job.

Change the device name

Some Bluetooth products display the name of the HP All-in-One when connected. If you do not want the default name displayed as the name of the HP All-in-One, you can change the device name.

26 Finish setting up the HP All-in-One

Page 29
Image 29
HP C5500 manual View and print Bluetooth settings, To view and print Bluetooth settings, Change the device name