TP-Link TD-W8980 manual MAC Clone, ALG Settings

TD-W8980

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

Click the Save button to save the settings.

4.5.5 MAC Clone

Choose menu “Network”Æ“MAC Clone”, you can configure the MAC address of the WAN Interface as shown below.

The WAN Interface List displays the Lay2 Interfaces you have configured on the section 4.5.1 WAN Settings and its default MAC Address. You can select corresponding WAN Interface from the drop-down list and click Clone MAC To button to clone your current PC MAC, and then click Save.

Figure 4-18

)Note:

Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be the same with each other.

4.5.6 ALG Settings

Choose menu “Network”Æ“ALG Settings”, and then you can configure the basic security in the screen as shown in Figure 4-19.

Figure 4-19

¾Virtual Private Network (VPN): VPN Passthrough must be enabled if you want to allow VPN tunnels using VPN protocols to pass through the modem router.

35