Manuals / TP-Link / Computer Equipment / Modem

TP-Link TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide, IP/MAC Address

Models: TD-W8980

1 120

Download 120 pages 13.27 Kb

Page 113

IP/MAC Address

TD-W8980

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

Figure 4-109

¾Statistics Status: Enable or Disable. The default value is disabled. To enable it, click the Enable. If it is disabled, the function of DoS protection in Security settings will be disabled.

¾Statistics Interval (5-60):The default value is 10. Select a value between 5 and 60 seconds in the drop-down list. The Packets Statistic interval indicates the time section of the packets statistic.

Click Reset All to reset the values of all the entries to zero.

Click Delete All to delete all entries in the table.

Click the Refresh button to refresh immediately.

Statistics Table:

	IP/MAC Address		The IP and MAC address are displayed with related statistics.

		Packets	The total number of packets received and transmitted by the
	Total	Packets	modem router.

		Bytes	The total number of bytes received and transmitted by the
			The total number of bytes received and transmitted by the
			modem router.
			modem router.

		Packets	The total number of packets received and transmitted in the last
		Packets	Packets Statistic interval seconds.

		Bytes	The total number of bytes received and transmitted in the last
		Bytes	Packets Statistic interval seconds.
			Packets Statistic interval seconds.

		ICMP	The number of the ICMP packets transmitted to WAN per second
		ICMP	at the specified Packets Statistics interval. It is shown like
	Current	Tx
		Tx	“current transmitting rate / Max transmitting rate”.
			“current transmitting rate / Max transmitting rate”.

		UDP Tx	The number of UDP packets transmitted to the WAN per second
		UDP Tx	at the specified Packets Statistics interval. It is shown like
			“current transmitting rate / Max transmitting rate”.

		SYN Tx	The number of TCP SYN packets transmitted to the WAN per
		SYN Tx	second at the specified Packets Statistics interval. It is shown like
			“current transmitting rate / Max transmitting rate”.

103

Image 113

TP-Link TD-W8980 manual N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide, IP/MAC Address, UDP Tx, SYN Tx

Contents

TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem RouterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTFCC RF Radiation Exposure Statement Canadian Compliance Statement National RestrictionsIndustry Canada Statement CountryNCC Notice& BSMI Notice Safety InformationKorea Warning Statements Page The product carries the CE Mark DECLARATION OF CONFORMITYETSI EN 300 328 V1.7.1 ETSI EN 301 489-1 V1.9.22011& ETSI EN 301 489-17 EN ENPackage Contents CONTENTSChapter 2. Connecting the Modem Router Chapter 3. Quick Installation GuideDual Band Selection Appendix C Technical Support Appendix A SpecificationsAppendix B Troubleshooting TD-W8980 Package ContentsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1.1 Overview of the Modem Router Chapter 1. Product OverviewN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980TD-W8980 1.2 Main FeaturesN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 1.3.1 The Front Panel 1.3 Panel LayoutN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980Quick N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 TD-W8980 1.3.2 The Back PanelN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 2.2 Installation Environment Requirements Chapter 2. Connecting the Modem Router2.1 System Requirements N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide2.3 Connecting the Modem Router TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide3.1 Configuring the PC Chapter 3. Quick Installation GuideN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980Step 3 Select General tab, highlight Internet Protocol TCP/IP, and then click the Properties button N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideNow, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd or command in the field and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 3.2 Quick Installation Guide2 Is the TCP/IP configuration for your PC correct? TD-W8980TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide3. Change the VPI/VCI values which are used to define a unique path for your connection. If you have been given specific settings for this to configuration, type in the correct values assigned by your ISP. Click Next TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide7. Configure the basic parameters for 5GHz wireless network in the following screen as shown in Figure 3-14, and then click Next TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide4.1 Login Chapter 4. Configuring the Modem Router4.2 Status N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide4.4 Operation Mode 4.3 Quick SetupN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Please refer to Section 3.2 Quick Installation GuideTD-W8980 4.5 NetworkN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.5.1 WAN Settings 4.5.1.1 Static IP ¾ Enable IPv6 Check the box to enable IPv6 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 4.5.1.2 Dynamic IPTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide4.5.1.3 PPPoE TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide¾ Enable IPv4 Check this box to enable IPv4 4.5.1.4 PPPoA N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 4.5.1.5 IPoA TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide¾ DNS Server/Secondary DNS Server Type in your preferred DNS server 4.5.1.6 Bridge4.5.2 Interface Grouping TD-W8980 4.5.3 LAN SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980 4.5.4 IPv6 LAN SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide1 If RADVD is selected, it doesn’t need to be configured 4.5.5 MAC Clone 4.5.6 ALG SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W89804.5.8 IPSec VPN 4.5.7 DSL SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideThis section will guide you to configure a VPN tunnel between two TD-W8980s. The topology is as follows We recommend you leave the Advanced Settings as default value N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 ¾ IPSec Connection Name Enter a name for your VPN4.6 DHCP Server TD-W8980 4.6.1 DHCP SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.6.2 Clients List3 If you select Disabled, the DHCP function will not take effect TD-W8980To modify or delete an existing entry 4.6.3 Address ReservationTo Reserve an IP address N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.6.4 Conditional PoolTD-W8980 To add a vendor class4.8.1 Basic Settings 4.8 Wireless 2.4GHz4.7 Dual Band Selection N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide¾ Mode Select the desired mode 4.8.2 WPS Settings ¾ WPS Enable or disable the WPS function here N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideI. Use the Wi-Fi Protected Setup Button TD-W8980TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideStep 2 Press and hold the WPS button of the client device directly II. Enter the client device’s PIN on the modem router4.8.3 Wireless Security TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 4.8.4 Wireless MAC FilteringN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.8.5 Wireless AdvancedTD-W8980 To edit or delete an existing entry¾ RTS Threshold Here you can specify the RTS Request to Send Threshold. If the packet is larger than the specified RTS Threshold size, the modem router will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 4.9.1 Basic Settings 4.9 Wireless 5GHz4.8.6 Wireless Status TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.9.2 WPS SettingsI. Use the Wi-Fi Protected Setup Button TD-W8980II. Enter the client device’s PIN on the modem router N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 III. Enter the modem router’s PIN on your client device 4.9.3 Wireless SecurityTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide4.9.4 Wireless MAC Filtering To edit or delete an existing entry N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 TD-W8980 4.9.5 Wireless AdvancedN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.9.6 Wireless Status 4.10 USB SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W89804.10.2 User Accounts 4.10.1 USB Mass StorageN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.10.3 Storage SharingTD-W8980 To add a new user account, please follow the steps belowTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide¾ Server Status Indicates the Storage Sharings current status To add a new folder, follow the instructions belowN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.10.4 FTP ServerTD-W8980 To add a new folder, follow the instructions below4.10.5 Media Server TD-W8980 4.10.6 Print ServerN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.11.1 Default Gateway 4.11 Route Settings4.11.2 Static Route N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.11.3 IPv6 Static RouteTD-W8980 To modify or delete an existing entryTo modify or delete an existing entry 4.11.4 RIP SettingsTo add a new entry, follow the instructions below 4.12.1 Virtual Servers 4.12 ForwardingN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980To set up a virtual server entry N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideIt is possible that you have a computer or server that has more than one type of available service. If so, select another service, and type the same IP address for that computer or server TD-W8980N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.12.2 Port TriggeringOtherwise there will be a conflict to disable the virtual server TD-W8980N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.12.3 DMZOnce the modem router is configured, the operation is as follows TD-W8980N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.12.4 UPnPTD-W8980 To assign a computer or server to be a DMZ serverTD-W8980 4.13 Parental ControlN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.14.1 Rule 4.14 IPv4 FirewallN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980The methods to add a new rule 4.14.2 LAN HostN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.14.3 WAN HostTD-W8980 To add a new entry, please follow the steps belowTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.14.4 ScheduleTD-W8980 To add a new schedule, follow the steps below4.15.1 IPv6 Rule 4.15 IPv6 FirewallN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980TD-W8980 4.15.2 IPv6 LAN HostN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.15.3 IPv6 WAN HostTD-W8980 To add a new entry, please follow the steps belowN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.15.4 IPv6 ScheduleTD-W8980 To add a new schedule, follow the steps belowTD-W8980 4.16 IPv6 TunnelN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide1 DS-Lite 2 6RD3 6to4 4.17 Bandwidth ControlTD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide¾ Total Upstream Bandwidth - The upload speed through the WAN port To add/modify a Bandwidth Control rule, follow the steps below4.18 IP&MAC Binding 4.18.1 Binding SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.18.2 ARP ListTD-W8980 To add IP & MAC Binding entries, follow the steps below4.19 Dynamic DNS 4.20 DiagnosticN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W89804.21.1 System Log 4.21 System ToolsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980TD-W8980 4.21.2 Time SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.21.3 Manage ControlTD-W8980 To set time manuallyTD-W8980 4.21.4 CWMP SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980 4.21.5 SNMP SettingsN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.21.7 Factory Defaults 4.21.6 Backup & RestoreN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.21.8 Firmware UpgradeAll changed settings will be lost when defaults are restored TD-W89804 The firmware version must correspond to the hardware 4.21.9 Reboot4.21.10 Statistics TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideIP/MAC Address UDP TxN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide 4.22 LogoutReset TD-W8980N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Appendix A SpecificationsTD-W8980 GeneralT2. What can I do if I don’t know or forget my password? Appendix B TroubleshootingN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide z In the Con-figure IPv4 box under TCP/IP, select Using DHCPz Click “View network status and tasks Change adapter settings” N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User GuideTD-W8980 For WindowsTD-W8980 T4. What can I do if I cannot access the Internet?N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide Technical Support Appendix C Technical SupportN600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide TD-W8980TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide