Hitachi GR2000 manual RM-IOS, RM-IOM, and RM-IOL, Pin No. Specifications

GR2000 Installation Guide

Table 3-10 Specifications of 8-pin RJ45 Connector on CONSOLE (10BASE-T/ 100BASE-TX) Port

Pin No. Specifications

1Transmit (+) (TA)

2Transmit (-) (TB)

3Receive (+) (RA)

4--

5--

6Receive (-) (RB)

7--

8--

3.3.6RM-IO(S), RM-IO(M), and RM-IO(L)

The RM-IO(S) for GR2000-4, the RM-IO(M) for GR2000-10, and the RM-IO(L) for GR2000-20 physically appear as Figure 3-12 and Figure 3-14.

The RM-IO(S), RM-IO (M) and the RM-IO(L) each has one CONSOLE (RS232C) port and one CONSOLE (10BASE-T/100BASE-TX) port. The connector specifications on these ports are the same as those for the RM-IO(4S) or RM-IO(H) defined in the preceding subsection.

				STATUS CODE				CONSOLE (RS232C)	1CONSOLE (10BASE-T/100BASE-TX)	G:LINK/ACT Y:LINE ERR T/R
	LAMP TEST		POWER READY ERROR ALARM POST DISP		MEM CARD ACCESS 0 ACCESS 1	MEM CARD	0
STATUS											RM-IO (S)
		RESET					1

Figure 3-15 RM-IO(S) Front Panel View

EMA SUPPRESS

EMA SUPPRESS

RM CHANGE

STATUS CODE

CONSOLE (RS232C)

1CONSOLE (10BASE-T/100BASE-TX)

G:LINK/ACT Y:LINE ERR T/R

LAMP TEST

ACTIVE POWER READY ERROR ALARM POST DISP

MEM CARD ACCESS 0 ACCESS 1

MEM CARD

0

STATUS

RM-IO (M)

RESET

1

or

RM-IO (L)

Figure 3-16 RM-IO(M) and RM-IO(L) Front Panel View

3-14	GR2K-GA-1002
	Rev. 6.03