Hitachi GR2000 manual Protocol operation Terminal DTE

Filling columns in application form		Designation of
		application	Setting the configuration
Connecting	General selection	when this	defining information of this	Remarks
		device is	device
condition	alternative
		connected
Protocol operation	Terminal (DTE)	Select optionally	No setting is required because of	Used most generally.
of PVC state		from the three	default operation. When setting
verification		kinds given on	explicitly, designate dte by using
procedure (LMI).		the left.	the poll_direction option of the
			frame-relay command.
	Net (DCE)		Designate dce by using the	Not used generally for
			poll_direction option of the	subscription to the
			frame-relay command.	public frame relay net.
	Di-directional		Designate "both" by using	is stopped because of
			poll_direction option of	the maintenance
			frame-relay command.	work. This allows the
				router of the
				connected
				counterpart to take
				appropriate actions
				including route
				change.