Hitachi GR2000 manual This case core/clad diameter is 62.5/125 µm, Operation terminal conditions

NWT3-1C switch and function of LED indication	3-62
Connector specifications for NWT3-1C	3-62
NEW1-8 switch and function of LED indications	3-63
NEW1-8 switch and function of LED indication	3-64
Connector Specification for NWE1-8	3-64
POW Models	3-65
Locations for Components of POW-M100H and POW-M100HA	3-68
Locations for Components of POW-M200H and POW-M200HA	3-69
Locations for Components of POW-MDCH and POW-MDCHA	3-70
Locations for Components of POW-L200H and POW-L200HA	3-71
Locations for Components of POW-LDCH and POW-LDCHA	3-72
V.24/V.35/X.21 Interface Cable Selection	3-76
Restrictions on cable length according to line speed	3-78
LAN Interface Cable Selection	3-85
Pin arrangement on the device side (10MBASE/100MBASE interface)	3-86
Pin arrangement on the device side (10MBASE/100MBASE interface)	3-86
Optical Interface Specifications for 100BASE-FX Multimode Connection
(In this case core/clad diameter is 62.5/125 µm.)	3-87
Optical Interface Specifications for 100BASE-FX and 1000BASE-LH Single-Mode
Connections	3-88
Customer Responsibility WAN Interface Cable Selection	3-90
Pin arrangement on the device side (1.430 interface)	3-91
Pin arrangement on the device side (primary group (1.431) interface)	3-92
Pin arrangement on the device side and DSU side (primary group (1.431) interface	3-94
Optical Interface Specifications for OC-48c/STM-16 (POS) Single-Mode Connections	3-97
Optical Interface Specification for NWOC48-1S8/1A8	3-98
ATM Interface Cable Selection	3-99
Specifications of Optical Interface	3-100
Specifications of Optical Interface	3-101

Chapter 4 - Precautions in Planning Installation	4-1
The operation terminal conditions	4-2
The cross cable specifications show the connection specifications for the cross cables	4-3
Modem setting	4-3
The RP mounting conditions by each model	4-7
RP mounting conditions when using GR2000-10H and GR2000-20H in 100V AC	4-8
Applicable Types and Quantities of RPs by Router Model	4-8
Quantities of NIFs by Router Model	4-9
BCU Memory Increment by Router Model	4-11
RP Memory Increment by RP Type	4-11
100BASE-TX Line Accommodation	4-11
100BASE-FX Line Accommodation	4-12
WAN Line Accommodation per NIF at Line Speed of up to 6 Mbps	4-12
WAN Line Accommodation per RP-A1 at Line Speed of up to 6 Mbps	4-12
WAN Line Accommodation per RP-D at Line Speed of up to 6 Mbps	4-13
E3 Multiplex Line Accommodation per RP-D at Line Speed of 34 Mbps	4-13
T3 Multiplex Line Accommodation per RP-D at Line Speed of 45 Mbps	4-13
WAN (ISDN) Line Accommodation Limit	4-14
WAN (Overload) Line Accommodation Limits	4-14
Multilink Overload Line Accommodation Limit: Inter-RP, Full Duplex, 64kbps Bundled	4-15
Multilink Overload Line Accommodation Limit: Inter-RP, Half Duplex, 64kbps Bundled	4-15
Multilink Overload Line Accommodation Limit: Intra-RP, Full Duplex, 64kbps Bundled	4-15
Multilink Overload Line Accommodation Limit: Intra-RP, Half Duplex, 64kbps Bundled	4-15
Restriction on Aggregate Line Speed for GR2000-4S and GR2000-4	4-17
Speed Conversion of Full-Size NIF	4-18
GR2K-GA-1002	li
Rev. 6.03