Hitachi GR2000 Operation terminal conditions, Terminal type Connection patter Required function

For the operation thereafter, a console or a remote operation terminal is required. The console shall use a terminal connected to RS232C, and the remote operation terminal shall use a terminal connected via IP network to remotely log in with this device by using telnet or rlogin, or log-in connected through the web browser. In addition, it is coordinated also with the network management by using the SNMP manager via the IP network. The connection patterns of the operation terminal are shown in Fig. 27-1: The connection patterns of the operation terminal, and the conditions for the remote operation terminal connection port and the operation terminal are shown in Table 27-2: The operation terminal conditions.

Table 4-1 The operation terminal conditions

Terminal type	Connection patter	Required function
Console	RM serial connection (RS232C)	RS232C(Line speed: 19200, 9600, 4800, 240,
	(Note 1) (Note 2)	1200) ZMODEM procedure (Note 6)
		(Line speed: 9600) ZMODEM procedure
		(Note 6)
	RM serial connection (Modem)	RS232C (Line speed: 9600)