Hitachi GR2000 manual Starting, Setting Up, and Stopping, Fans

GR2000 Installation Guide

Chapter 7 - Starting, Setting Up, and Stopping		7-1
7.1	Overview of Device Operation	7-1
7.2	Starting the Router	7-2
7.3	Restarting the Router	7-2
7.4	Setting Up Initial Configuration	7-3
7.5	Stopping the Router	7-3

Chapter 8 - Adding and Removing Components			................................. 8-1
8.1 BCU, RP, and NIF Modules			8-1
8.2 Power Supply Components			8-5
8.2.1	GR2000-4S		8-5
8.2.2	GR2000-6H		8-6
8.2.3	GR2000-10H		8-8
8.2.3.1		Input Unit (AC or DC)	8-8
8.2.3.2		DC-DC Unit	8-9
8.2.4	GR2000-20H		8-10
8.2.4.1		Input Unit (AC or DC)	8-10
8.2.4.2		DC-DC Unit	8-11
8.2.5	GR2000-4		8-12
8.2.6	GR2000-10		8-13
8.2.6.1		POW for AC Input	8-13
8.2.6.2 POW for DC Input			8-14
8.2.7	GR2000-20		8-15
8.2.7.1		POW for AC Input	8-15
8.2.7.2 POW for DC Input			8-16
8.3 Fans	.................................................................................................................................................		8-17
8.3.1	Fan Tray for GR2000-10H		8-17
8.3.2	Fan Tray for GR2000-20H		8-18
8.3.3 CPU Fan for GR2000-4, GR2000-10, and GR2000-20			8-19
8.4 Main Memory Module			8-20
8.4.1	Addition/Removal of Main Memory Module for RM (BCU)		8-20
8.4.2	Addition/Removal of Main Memory Module for RP		8-21
8.5 Hot-Swapping of Components			8-21
8.5.1	Basic Control Unit (BCU)		8-21
8.5.1.1 Adding a BCU			8-22
8.5.1.2 Removing a BCU			8-22
8.5.2	Routing Processor (RP)		8-23
8.5.2.1 Adding an RP			8-23
8.5.2.2 Removing an RP			8-23
8.5.3	Network Interface (NIF)		8-23
8.5.3.1		Adding an NIF	8-23
8.5.3.2 Removing an NIF			8-23
xl			GR2K-GA-1002
			Rev. 6.03