this connection work requires expertise, the work must be conducted by qualified personnel. The steps are as follows:
1.Procure the DC input power cable in compliance with the specifications shown below. When the power supply is duplexed (redundant), procure two cables.
Cord structure:
AWG No. of each conductor (determined by ampacity): 8
Cord diameter (determined by cable clamp): 23mm or smaller
Size of
2.Ensure that the breaker switch in the front end of the chassis is in the O (out) position. When the power supply is duplexed, make sure in two positions.
3.Connect each terminal wire of the input power cable firmly to the terminal board and the ground. See Figure
4.Fix the input power cable with the cable clamp (not illustrated). When the power supply is duplexed, repeat the fixation in two positions.