Hitachi manual Front View of GR2000-6H

GR2000 Installation Guide

Acrylic Cover
	RM-CPU1
	RM-IO1
	88
	RM-CPU0
RS-232C port	RM-IO0
	88	RP0
(for AUX)	NIF1	NIF0
		RP1
LED (status	NIF3	NIF2
indicator)		RP2
	NIF5	NIF4

Memory card slot RS-232C port (for console)

The RP.NIF number starts from 0.1 on the upper tier, being different from 4S.

Figure 2-33 Front View of GR2000-6H

Power switch

Power cord receptacle

Figure 2-34 Rear View of GR2000-6H GR2000-10H

Mounting position of power supply unit

POW1

POW0

This model incorporates one BCU, one RP, and two POWs; the BCU consists of one RM and one CSW, and is physically packaged in one RM-CPU module and one RM-IO module. One BCU for redundancy, up to four additional RPs, and two POWs for redundancy can be installed as options, independently of one another. Since one RP can handle up to two NIFs, a total of ten NIFs can be installed on this model. The BCU redundancy is made available by mounting the optional RM-CPU and RM-IO modules in the RM-CPU1 and RM-IO1 slots; otherwise, only the base RM-CPU and RM-IO modules are mounted in the RM-CPU0 and RM-IO0 slots.

The front view when PS is mounted with an AC input unit is shown in Figure

2-35, the front appearance view of GR2000-10H (AC input), and the rear view in Figure 2-36, the rear appearance view of GR200-10H(AC input).

2-24	GR2K-GA-1002
	Rev 6.03