Hitachi manual 2.6 GR2000-4, Terminal Board/Wire Dimensions for DC Input to GR2000-20H

48

ø 6.4 Min.

12.4 Max.

9.3 Min.

Unit: mm

Figure 6-53 Terminal Board/Wire Dimensions for DC Input to GR2000-20H

6.4.2.6GR2000-4

Figure 6-54 shows how to connect the input power cable to GR2000-4, which accepts only AC input (100V or 200V). The steps are as follows:

1.Ensure that the power switch in the rear end of the chassis is in the O (out) position. When the power supply is duplexed (redundant), make sure in two positions.