Hitachi manual 2.1 GR2000-2S, Rear

This subsection shows you how to connect input power cables to specific models of GR2000-2S, GR2000-10H, GR2000-20H, GR2000-4, GR2000-10, and GR2000-20.

6.4.2.1GR2000-2S

Figure 6-46 shows how to connect the input power cable to GR2000-2S, which accepts only AC input (100V or 200V). The steps are as follows:

1.Ensure that the power switch in the rear end of the chassis is in the O (out) position.

2.Insert the receptacle on the input power cable firmly to the plug adjacent to the power switch.

Rear