Hitachi GR2000 manual Routing Processor RP, RP-A1/RP-D/RP-D6, RP Models

GR2000 Installation Guide

3.4Routing Processor (RP)

Three types of RP models, RP-A1 (standard), and RP-C/C6 and RP-D/D6 (options for highspeed media), apply to the GR2000 device models as listed in Table 3-12. Each RP model comprises one RP board. Description of each RP board follows.

Table 3-12 RP Models

RP Model Name	Board Size	Applicable Device Model
RP-A1	Full-size, 30mm-wide	GR2000-4S, GR2000-6H, GR2000-10H, GR2000-20H,
		GR2000-4, GR2000-10, and GR2000-20
RP-C/C6	Full-size, 30mm-wide	GR2000-6H, GR2000-10*, GR2000-10H*, GR2000-20H*,
		and GR2000-20*
RP-D/D6	Full-size, 30mm-wide	GR2000-4S** GR2000-6H, GR2000-10,GR2000-10H,
		GR2000-20H, and GR2000-20

* Use of RP-C sometimes limits configuration of these models. For details, see Section 4.2, “Configuration Limits.”

** The MPLS or MPLS-based IP-VPN feature is not available for use with the GR2000-4S.

3.4.1RP-A1/RP-D/RP-D6

The RP-A1 physically appears as Figure 3-20. To explore the switch and LED display functions, see the Operations Guide.

or

42￿&￿

				75
				#
					￿	￿	￿
	Figure 3-20 RP-A1/RP-D/RP-D6 Front				5	5	5
					Panel View
	Switch and LED indication
	Table 3-13	BCU switch and function of LED indications
Nam	Name of switch		Status		Content
	and LED
STATUS	LED: Green/		Shows the operating		Green: Operable operation
	Yellow/ Red		condition of RP.		Yellow: Blocking and cock insertion and removal
				6	possible.
					Green blinking: Under preparation (being started up.)
					Red: Fault
					Extinguished: Operation not possible (Including the
					device power supply being turned off)			#
S1	LED: Green				Don’t care
S2	LED: Green				Don’t care
S3	LED: Green				Don’t care
3-16									GR2K-GA-1002
									Rev. 6.03