Hitachi GR2000 manual RP-D6, RP-C6, Rp-Cv

			Product Overview
	Table 2-4 RP Specifications
RP name	Specification		Note
RP-D6	GR2000 IPv6 compatible		GR2000-2S: Not
	Has RP-D function		mountable
	IPv6, IPv4 dual stack
	Packet transfer rate: 1.0Mpps (IPv4)
	(Full duplex)0.8Mpps (IPv6)
	MS = 128MB (standard) - 256MB (max)
	• Packet transfer engine is used commonly for transmission and	reception.
	• Routing retrieval engine is used commonly for transmission and reception.
	• The mounted processor is MIPS RM7000 250Mhz.
RP-C6	RP-C6 is a routing processor to which the hardware routing function of IPv6 has
	been enhanced on RP-C to accommodate high-speed lines such as OC-48c and the
	gigabit Ethernet of multi-port versions. Its hardware configuration is as follows:
	• The packet transfer engines are exclusively mounted for transmission and
	reception.
	• The routing retrieval engines are exclusively mounted for transmission and
	reception.
	• The mounted processor is MIPS RM7000 "250 MHz".
	• A memory of 128 M bytes is mounted in a fixed way.
RP-CV	RP-CV is a routing processor to which the hardware routing function of IPv6 has
	been enhanced on RP-C to accommodate high-speed lines such as OC-48c and the
	gigabit Ethernet of multi-port versions. Its hardware configuration is as follows:
	• The packet transfer engines are exclusively mounted for transmission and
	reception.
	• The routing retrieval engines are exclusively mounted for transmission and
	reception.
	• The mounted processor is MIPS RM7000 "250 MHz".
	• A memory of 128 M bytes is mounted in a fixed way.

(*1) For the GR2000-10/20, there are some limitations on installation of RP-C boards and NIF modules supporting them. For more information, see "adding enhanced features" in Section 7.1.1.

(*2) The MPLS or MPLS-based IP-VPN feature is not available for the GR2000-2S/4S.

GR2K-GA-1002	2-33
Rev 6.03