TP-Link TD-W8980 manual N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

TD-W8980

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

¾Disable Wireless Security: If you do not want to use wireless security, check this radio button. But it’s strongly recommended to choose one of the following modes to enable security.

¾WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase. The modem router is configured by this security type by default.

•Authentication Type: You can choose the type for the WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can select WPA-PSKor WPA2-PSKauthentication type automatically based on the wireless station's capability and request.

•Encryption: You can select Auto, TKIP or AES as Encryption.

•Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. The default password is the same with the default PIN code, which is labeled on the bottom of the Router or can be found in Figure 4-32.

•Group Key Update Period: Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

¾WPA/WPA2 – Enterprise: It’s based on Radius Server.

•Authentication Type: Authentication Type: You can choose the type for the WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK authentication type automatically based on the wireless station's capability and request.

•Encryption: You can select Auto, TKIP or AES as Encryption.

•RADIUS Server IP: Enter the IP address of the Radius Server.

•RADIUS Server Port: Enter the port that radius service used.

•RADIUS Server Password: Enter the password for the Radius Server.

•Group Key Update Period: Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

¾WEP: It is based on the IEEE 802.11 standard.

59