Setting the Address Manually
You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (For more information, see Understanding the Ethernet Configuration Menus in the Phaser 6120 Reference Guide on the Software and Documentation
" When the IP address is changed, add a new port or reinstall the printer driver.
CAUTION
You should always notify the network administrator before changing the printer’s IP address.
1Turn on your PC and printer.
2When the printer’s message window displays READY, set the IP address. a Select Connection Setup, and then press the Menu/Select key.
b Select Network Setup, and then press the Menu/Select key. c Select TCP/IP, and then press the Menu/Select key.
d Select IP Address, and then press the Menu/Select key. e Use the Up and Down keys to select the IP Address.
f Use the Right and Left keys to move to the next set of numbers. g Repeat Steps e and f until you have selected the entire IP Address.
3If you do not need to set the subnet mask or gateway, go to step 5. To set the subnet mask, but not the default router, go to step 8.
To set the default router, follow these steps.
aSelect Default Router, and then press the Menu/Select key.
bUse the Up and Down keys to select the Default Router numbers.
cUse the Right and Left keys to move to the next set of numbers.
dRepeat Steps and b and c until you have selected the entire Default Router number.
8 | Network Connection |
