Xerox 6120 manual Status, Error, and Service Messages, MODE is set to AUTO, CONTINUE is set to ON

This message...	means...	do this...
PAPER SIZE MISMATCH	When using Tray 1:	Printing continues with
	The paper size set from	paper of a different size,
	the printer driver is	even if this message
	different from the size of	appeared.
	paper loaded into Tray 1.	To print using paper of
	This message appears	the desired size, load
	when PAPER MENU/
		paper of the correct size,
	INPUT TRAY/TRAY
		and then try printing
	1 MODE is set to AUTO.
		again.
	When using Tray 2:
	The paper size set from
	the printer driver is
	different from the size of
	paper loaded into Tray 2.
	This message appears
	when PAPER MENU/
	INPUT TRAY/AUTO
	CONTINUE is set to ON.
X TONER LOW	The X toner cartridge is	Replace the specified
	low and should	toner cartridge soon.
	be replaced within 200	Be sure to have a toner
	pages at 5% coverage of	cartridge on hand
	letter/A4 pages.
TRAY 2 OPEN	Tray 2 is not installed or	Close Tray 2 or print
	is not fully closed.	from another tray.

130 Status, Error, and Service Messages