Xerox 6120 manual Connection Setup Menu, 192.168.1.2, About the Control Panel, Yes/No

CONNECTION SETUP MENU

With this menu, interface settings can be specified.

" Restart the printer after changing settings in the NETWORK SETUP menu.

" All factory default values are shown in bold.

NETWORK

SETUP

TCP/IP

ENABLE	Settings	YES/NO
	If YES is selected, TCP/IP is enabled.
	If NO is selected, TCP/IP is disabled.
DHCP/	Settings	ON/OFF
BOOTP
	Select whether or not the IP address is
	automatically acquired.
	If YES is selected, the IP address is
	automatically acquired.
	If NO is selected, the IP address is not
	automatically acquired.
IP	Setting	192.168.1.2
ADDRESS
	Set the IP address for this printer on the
	network.
	Use the Up, Down, Left, and Right keys
	to specify the value.
	If the IP address is manually specified,
	DHCP/BOOTP is automatically set
	to NO.
DEFAULT	Setting	192.168.1.2
ROUTER
	Specify the IP address of the router if
	one is on the network. Use the Up,
	Down, Left, and Right keys to specify
	the value.

36 About the Control Panel