Xerox 6120 manual Transparencies,   , Media Types

Transparencies

"

"

"

Do not fan transparencies before loading them. Resulting static electricity may cause printing errors.

If you touch the face of the transparencies with your bare hands, print quality may be affected.

Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 7, “Maintaining the Printer” .

" Remove transparencies as soon as possible from the output tray to avoid static buildup.

You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality, static buildup, and printing environment.

Try printing your data on a sheet of plain paper first to check placement.

" If you have problems feeding 50 sheets, try loading only 1–10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, causing feeding problems.

Capacity	Tray 1	Up to 50 transparencies,
		depending on their thickness
	Tray 2	Not supported
Orientation	Face up
Driver Media Type	Transparency
Duplexing	Not supported

" Always first test a small quantity of a particular type of transparency.

Use transparencies that are

„Phaser 25-Series Premium Transparency Film DO NOT use transparencies that

„Have static electricity that will cause them to stick together

„Are specified for inkjet printers only

52 Media Types