Xerox 6120 Tray, Duplex, Off/Shortedge/Longedge, Portrait/Landscape, Ion, Jam, On/Off, Recovery

TRAY	Settings	YES/NO
SWITCHING* If YES is selected and the specified paper tray runs

*out of paper during printing, a paper tray loaded with paper of the same size is automatically selected so printing can continue.

		If NO is selected and the specified paper tray runs out
		of paper, printing stops.
DUPLEX	Settings	OFF/SHORTEDGE/LONGEDGE
	If OFF is selected, duplex printing is not possible.
	If LONGEDGE is selected, the pages will be printed on both sides of
	the paper for long-edge binding.
	If SHORTEDGE is selected, the pages will be printed on both sides of
	the paper for short-edge binding.
ORIENTAT Settings		PORTRAIT/LANDSCAPE
ION
	Specify the orientation of the media.
JAM	Settings	ON/OFF
RECOVERY
	Select whether	or not the page is printed again after recovering from a
	paper misfeed.
	If ON is selected, the page that was misfed is printed again.
	If OFF is selected, printing continues with the next page without
	printing the misfed page.
" ** These menu items appear only if the optional Tray 2 is installed.

About the Control Panel 33